Are you seeking clues on how to get Brother Printer out of sleep? If yes, you have come to the right place. Brother Printers are among the popular printer brands around the globe. These printers are also well-built.
The Brother Printer is also a feature-rich machine. But then, users have to understand how each feature works to use the printer satisfactorily.
In sleep mode, this printer won’t respond to your print request. You have to wake it up from sleep to print your document. It’s quite easy to wake the printer from sleep, and there are diverse ways to do it.
Now, the question is, how can one remove Brother Printer from sleep mode? You’ll find the details in this post. Keep reading!
Why Is Brother Printer Sleep Mode Important?
The benefit of the sleep modes is to save energy. So another name for the sleep mode is “power saving mode.”
Printers use electricity, and thus, contribute to your energy bill, regardless of whether they’re idle or used to print documents.
The only way to prevent your Brother printer from not consuming much energy when turned on is sleep mode. But then, you must wake it up whenever you’re ready to print.
These printers also have a sleep mode and deep sleep mode. When Brother Printer stays idle for some period, it will go into sleep mode. From sleep mode, the printer enters “Deep sleep mode.”
Now, what’s the difference between “sleep mode” and “deep sleep mode?” Both modes enable the printer to save energy. But the deep sleep mode saves more energy.
The exciting thing about this printer brand is that you can determine how long you want it to remain idle before sliding into sleep mode.
Most people may want to boycott sleep mode in their printer. But the thing is, turning off a printer after every use and back on whenever you want to print, is tiring. Your printer will also consume more energy if you allow it to stay idle for long.
Ways To Get Brother Printer Out of Sleep Mode
You can get your Brother printer off sleep mode in several ways. We’ll be discussing them in detail for better understanding.
Method 1: Use the “OK” button:
Before we go deeper, be reminded that Brother has a range of models. Therefore, on some of their printers, you’ll find a “Go” button instead of an “OK” button. Nevertheless, both buttons do the same thing.
Let’s assume the printer we’re referring to has an “OK” button. Note also that the location of this button may vary from one Brother Printer to another, but all the same, it’s visible on the machine.
So, how can you wake your printer from sleep using this method? Just press the “OK” or “Go” button, and your printer will get into “ready mode.” It’s as simple as that.
However, if you have pressed the “OK” button but your printer won’t leave the sleep mode, consider trying other methods.
A Handy Tip: How to deactivate the sleep time on the computer – Windows or Mac:
This method is a continuation of method one, where we discussed how to directly deactivate the sleep mode from the printer’s control panel.
However, if you cannot deactivate or get your printer off sleep mode from the printer, you can do it from your computer. Here’s how it’s done.
For Windows Computers:
Step 1: Open your PC’s control panel and click on “Devices and Printers.”
Step 2: Right-click on “Brother Printer:
Place the cursor on the Brother Printer and right-click on it. Now, choose your “Printing Preferences” to proceed.
Step 3: In this step, hit the “Advanced” icon followed by “Other Print Options.”
Step 4: The next step is to hit “Sleep Mode.” You’ll find it on the left-hand side. Then follow this by selecting your sleep time manually. You can set it to 99 or less, whatever time you think is appropriate for you.
Once you’re done with the settings, ensure you save it.
For Mac Computers:
Here’s how you can remove your Brother printer from sleep mode on your Mac computer.
Step 1: Open Brother Printer’s application then click on the file. After this, navigate to the “Print” option.
Step 2: The “Show details” is the next icon to click on. Then from the drop-down menus, choose the print settings.
Step 3: The next icon to click on is the “Advanced” icon. Then the next thing is to set the sleep time you want.
In this scenario, it would make sense to choose maximum sleep time so your printer can stay active for a long time. Finally, click the “OK” icon to complete your settings.
Method 2: Adjust “Sleep Mode” on Brother Printer:
You can adjust your printer’s sleep mode directly on the printer instead of the computer itself. Your Brother Printer will get off sleep mode when you make the adjustments.
Here’s how it is done.
Step 1: All the adjustments will occur from the “printer’s menus.” So, go to the menu.
Step 2: Head to the “General Setup,” then “Ecology,” and finally, “Sleep Time.”
You can make two adjustments in this section. That is, you can adjust the time it takes for the printer to enter sleep mode or turn off the sleep mode completely.
Step 3: Let’s assume you wish to turn the sleep mode off. If that’s the case, hit the “Start” and “Options” buttons together.
Once done, check your Brother Printer’s small screen. You’ll see the Sleep mode: On. Now, hit the up or down arrow key to turn off the printer correctly. Then press OK before you exit.
Now, let’s assume you want to adjust the sleep mode time. What should you do in this case? Just enter the number of minutes you want the printer to remain awake.
Note that you can set your Brother Printer to stay awake for 99 minutes.
Method 3: Update printer firmware:
Do you know your printer can start malfunctioning when its firmware is outdated? The printer could enter sleep mode by itself or refuse to get off when the firmware has an issue.
So, if you have attempted the two earlier methods discussed but can’t fix the problem, consider updating your device’s firmware.
Alright, here is how to update Brother Printer firmware:
Step 1: Get your computer and visit Brother Printer’s official website to download the firmware. Once downloaded, connect the printer to the computer system.
Step 2: Now, run the “setup file” and click “Yes” when prompted.
Step 3: Choose “Brother Printer” and hit “Next” to proceed to the other phase.
Step 4: Start the “Firmware” update by clicking the option “I accept.”
The final stage is simple. Just hit the “Next” icon and follow the prompts to update the device firmware.
Method 4: Restart Brother Printer:
If you have tried all the strategies to get your Brother Printer out of sleep mode but failed, consider restarting it. Restarting a printer may seem like a chore, but sometimes, it’s the best way to get past sleep mode.
Our electrical devices sometimes need a break. Your printer may even start working well when you restart it.
So, turn off your Brother Printer and let it remain that way for a minute or two before switching it on. You can also do a deep reboot to boost the chances of getting the printer off sleep mode.
To reboot, turn off the printer and unplug it from the wall outlet. Then wait about 5 minutes or a bit more before you plug it back and turn it on.
Extra Tips On Getting Brother Printer Out Of Sleep
- Understand that you may have difficulty waking your printer if it’s not connected to a power supply. So, ensure it is connected to the wall outlet
- When you succeed in waking up your printer, but it refuses to print, the network could be the culprit. So, check the network if your printer has refused to work as it should.
- Set your printer to default on your computer. Otherwise, it won’t print. The default setting will ensure your computer only send files to the Brother Printer.
We have finally discussed how to get Brother Printer out of sleep. You’ll find diverse ways to get your printer off sleep mode and start printing.
The sleep or deep sleep mode enables the printer to save energy. In addition, these modes ensure the printer is almost entirely inactive, which helps ensure you don’t accrue high energy bills.
So, if your printer is in sleep mode, use the methods mentioned here to get it out and start printing. Note also that the processes are a breeze. You only have to click a few buttons to get your printer out of sleep mode.